Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Locking Pin (T10060 A)

Removing

- Remove the noise insulation.

- Mark the rotation direction of the ribbed belt.

- Rotate the belt tensioner in the - direction of the arrow - in order to release the tension on the ribbed belt.






- Align the holes - arrows - and secure the tensioner using the locking pin (T10060 A).






- Remove the ribbed belt.

Installing

Install in the reverse order of removal. When doing this note the following:

• Ensure that the generator and Air Conditioning (A/C) compressor are secured before installing the ribbed belt.

• Note the previously marked belt rotation direction and be sure that it is seated correctly on the pulleys.

- Install the ribbed belt on the pulleys.






1 - Vibration Damper

2 - Belt Tensioner

3 - Generator

4 - A/C Compressor

When finished, always perform the following work:

- Start the engine and check the belt.