Bass, Rear

Bass, Rear

Removal and installation of left or right side speakers is identical.

Removing


• Turn off the ignition and all electrical consumers.

• Remove the key.

- Remove the rear door trim panel.

- Unlock and disconnect the connector - arrows -.






- Drill out rivets - arrows - and remove speaker.






• Always remove any shavings resulting from the drilling, otherwise they may cause corrosion damage later.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installing

- There are special blind rivets for installing the new speaker. Refer to Electronic Parts Catalog (ETKA).

Install in reverse order of removal.