Fuel Injectors, Removing and Installing

Fuel Injectors, Removing and Installing

Perform the following:

Removing

• Follow all Safety Precautions. Refer to => [ Safety Precautions ] Safety Precautions.

• Follow the guidelines for cleanliness. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Remove fuel rail with fuel injectors => [ Fuel Rail and Fuel Injectors, Removing and Installing ] Fuel Rail and Fuel Injectors, Removing and Installing.

- Remove the retaining clips - 2 - and the fuel injectors - 1 - from the fuel rail - 3 -.






Installing

- Install new O-rings for fuel injectors and coat them lightly with clean engine oil.

- Insert the fuel injectors - 1 - into the fuel rail - 3 - and secure them with the clamps - 2 -.






- Make sure the fuel injectors are secure after installing them.

- Install fuel rail with fuel injectors => [ Fuel Rail and Fuel Injectors, Removing and Installing ] Fuel Rail and Fuel Injectors, Removing and Installing.

• If the fuel injectors were replaced, then erase the adaptation values and adapt the engine control module again => Vehicle Diagnosis Tester "Guided Functions".