Right Front Passenger Seat without Height Adjustment Trim Piece

Right Front Passenger Seat without Height Adjustment Trim Piece

• The following describes the removal and installation of the left front passenger seat. The driver seat has height adjustment.

Removing

- Remove the screws - 3 - from the trim - 1 - (3 Nm).

- Remove the expanding pin - 4 - and remove the expanding clip - 5 - from the trim - 1 -.

- Loosen the clips - 2 - in the trim - 1 - on the seat frame.

- Remove the trim - 1 - from the seat frame in direction of travel.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.