Rear Vehicle Level Sensor, Removing and Installing

Rear Vehicle Level Sensor, Removing and Installing

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

Perform The Following:

Removing

- Disconnect the harness connector - 1 -.






- Remove the bolts - 2 - from the lower transverse link.

- Remove the bolts - 3 - from the subframe.

- Remove Left Rear Level Control System Sensor (G76).

Installing

Install in reverse order of removal. Note the following:

The lever on the left rear level control system sensor (G76) must point toward the outside of the vehicle.

- Perform a basic setting on the headlamps after replacing them, refer to Vehicle diagnostic tester.

Tightening Specifications