Rearview Camera System, Calibrating

Rearview Camera System, Calibrating

Special tools, testers and auxiliary items required

• Calibration Device (VAS6350)






After performing service work on the vehicle, it may be necessary to calibrate the rear view camera system anew. In detail, this is the case after:

• removing and installing rear view camera

• replacing the rearview camera system control module

• after repair work performed on rear lid following an accident

• after an axle alignment

• after performing a repair at front or rear axle

Extensive preparatory work must be completed before the appropriate calibrating procedure can be performed using the vehicle diagnostic tester. This is described in the following.