Door Sill Side Trim, Power Driver Seat

Door Sill Side Trim, Power Driver Seat

Removing

- Switch off the ignition.

- Remove bolt - 1 - (2 Nm).

- Compress clamping pin - 2 - inward and remove expanding clip - 3 -.

- Pull the trim off the seat.

- Disconnect the wiring harness from the Driver Seat Lumbar Support Adjustment Switch (E176) - 4 - and from the Driver Seat Adjustment Control Head (E470) - 5 -.

- Remove the wiring harness from the trim.






Installing

- Install in reverse order of removal.