Tunnel Side Trim
Tunnel Side Trim
Removing
• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
• Removing and installing the trim is identical for seats equipped with a pass-through.
- Remove the front seat. Refer to => [ Front Seat ] Front Seat
- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Front Seat Belt Latches
- Press the clamping pin - 1 - inward and remove it from the expanding clip - 2 -.
- Remove the spreader clip.
- Remove the trim - 3 - from the mountings in the seat frame.
Installing
- Install in reverse order of removal.