High Beam Headlamp Bulb and Daytime Running Lamp Bulb

High Beam Headlamp Bulb and Daytime Running Lamp Bulb

• The left high beam headlamp bulb (M30) and the right high beam headlamp bulb (M32) is a two-filament bulb and functions also as the left daytime running lamp (L174) and the right daytime running lamp (L175).

• The following illustrations show replacing the high beam headlamp/daytime running lamp bulb on a removed headlamp.

• It is not necessary to remove the headlamp in order to replace a high beam headlamp/daytime running lamp bulb.

• The illustrations show removing and installing high beam headlamp/daytime running lamp bulb on a left headlamp. Replacing the right high beam headlamp/daytime running lamp bulb is identical.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the cap - 2 -.






- Turn the bulb socket - 1 - all the way in - direction of arrow - and remove it from the headlamp together with the high beam headlamp bulb.






• The electric connection on the high beam headlamp bulb is disconnected at the same time.

• The high beam headlamp/daytime running lamp bulb and the bulb socket are a single piece and cannot be disassembled.

High beam headlamp bulb 12V, 55W

Installing

Make sure the cap fits correctly when installing it. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the lamp is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check the headlamp functions.

- Check the headlamp adjustment and adjust it if necessary.