Low Beam Headlamp Bulb

Low Beam Headlamp Bulb

• The following illustrations show replacing the low beam headlamp bulb on a removed headlamp.

• It is not necessary to remove the headlamp in order to remove the low beam headlamp bulb.

• Illustrations depict replacement of left low beam headlamp bulb. Replacing the low beam headlamp bulb in the right headlamp is identical.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Turn the cap - 1 - all the way in - direction of arrow - and remove it.






- Turn the bulb socket - 1 - all the way in - direction of arrow - and remove it from the headlamp together with the low beam headlamp bulb.






• The electric connection on the low beam headlamp bulb is disconnected at the same time.

- Pull the low beam headlamp bulb - 2 - in the - direction of the arrow - straight out of the lamp socket by the handle - 1 -.






Low beam headlamp bulb 12V, 55W

Installing

Make sure the cap fits correctly when installing it. It is destroyed by ingress of water into headlamp.

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the lamp is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check the headlamp functions.

- Check the headlamp adjustment and adjust it if necessary.