Driver Side Airbag Crash Sensor G179

Driver Side Airbag Crash Sensor G179

Removing

• The Front Passenger Side Airbag Crash Sensor (G179) is located on the front door subframe.

• The Driver Front Airbag Crash Sensor (G283) in installed in the engine compartment above the left longitudinal member.

Observe safety precautions for working on airbags. Refer to => [ Airbag System Safety Precautions ] Airbag System Safety Precautions.

- Disconnect the battery.

- Remove driver side front door trim. Refer to => [ Front Door Trim ] Front Door Trim

- Remove the front door subframe.

- Drill out pop rivet - 1 -.

- Drill out pop rivet - 2 -.

- Press connector lock and remove connector - 4 - from Driver's Side Airbag Crash Sensor (G179) - 3 -.






Installing

- Connect connector - 4 - to Front Passenger Side Airbag Crash Sensor (G179) - 3 -.

- Secure Front Passenger Side Airbag Crash Sensor (G179) with pop rivet - 2 - to subframe using Pop rivet pliers (VAS 5072).

- Secure Front Passenger Side Airbag Crash Sensor (G179) with pop rivet - 1 - to subframe as described.






- Install in reverse order of removal.

- Switch on ignition.

Make sure no one is in the vehicle.

- Connect the battery.