Adaptive Chassis DCC Suspension Strut

Overview: Adaptive Chassis DCC Suspension Strut






1 Shock Absorber with Left Front Dampening Adjustment Valve (N336)

• individually replaceable

• Allocation, refer to the Parts Catalog

2 Stop Buffer

• Allocation, refer to the Parts Catalog

3 Protective Sleeve

4 Coil Spring

• Removing and installing, refer to => [ Adaptive Chassis DCC Suspension Strut ] Adaptive Chassis DCC Suspension Strut

• Note color code

• Allocation, refer to the Parts Catalog

Spring allocation via PR No.

These numbers can be found on vehicle data plate.

• Surface of spring coil may not be damaged

5 Axial groove ball bearing

6 Suspension strut bearing

• Note installed position. Refer to => [ One of two markings on spring plate must point in direction of travel. ] Adaptive Chassis DCC Suspension Strut

7 Hex nut

• 60 Nm

• M14 x 1.5

• Self-locking

• Always replace if removed.

8 Suspension strut dome

9 Bracket

• for the left front body acceleration sensor (G341)

• Removing and installing, refer to => [ Left and Right Front Body Acceleration Sensors (G341/G342) Brackets ] Left and Right Front Body Acceleration Sensors (G341/G342) Brackets

• An "L" is stamped on the retainer

• Be sure to use the correct retainer.

10 Left Front Body Acceleration Sensor (G341)

• Removing and installing, refer to => [ Left Front Body Acceleration Sensor (G341), ] Left Front Body Acceleration Sensor (G341),

• Note the installation position of the retainer => [ (Item 9) Bracket ] => [ Installation position on the retainer ]

11 Bolt

• 5 Nm

• Always replace if removed.

12 Bolt

• M8 x 26

• 15 Nm + 90°additional turn

• Always replace if removed.

13 Bracket

• for the right front body acceleration sensor (G342)

• Removing and installing, refer to => [ Left and Right Front Body Acceleration Sensors (G341/G342) Brackets ] Left and Right Front Body Acceleration Sensors (G341/G342) Brackets

• An "R" is stamped on the retainer

14 Right Front Body Acceleration Sensor (G342)

• Removing and installing, refer to => [ Right Front Body Acceleration Sensor (G342) ] Right Front Body Acceleration Sensor (G342)

• Note the installation position of the retainer => [ (Item 13) Bracket ] => [ Installation position on the retainer ]

15 Nut

• 5 Nm

• Always replace if removed.

Installation position left front body acceleration sensor (G341) on the retainer





The tab on the retainer - 1 - must fit into the recess in the left front body acceleration sensor (G341) - arrow -.

• Be sure to use the correct retainer. An "LA" is stamped on the retainer

Installation position right front body acceleration sensor (G342) on the retainer





The tab on the retainer - 1 - must fit into the recess in the right front body acceleration sensor (G342) - arrow -.

• Be sure to use the correct retainer. An "R" is stamped on the retainer.