Oil Level Sensor: Service and Repair

Oil Level Thermal Sensor G266

Removing

- Drain the engine oil.

- Disconnect the connector - 3 -.






- Remove the nuts - 1 - and the oil level thermal sensor - 4 -.

Installing

• For the correct tightening specifications, refer to => [ Oil Pan, Oil Pump and Oil Cooler Overview ] Oil Pan, Oil Pump and Oil Cooler Overview.

Installation is carried out in the reverse order while noting the following:

- Replace the seal - 2 -.

- Check the oil level. Refer to => [ Oil Level, Checking with the ] Oil Level, Checking with the Oil Gauge Tester (T40178).