Scan Tool Testing and Procedures
Vehicle Electrical System Control Module (J519), Output Diagnostic Test Mode
The following components can be checked with vehicle electrical system control module Output DTM:
• Right Low Beam Headlamp (M31) , for vehicles with gas-discharge lamps Right High Intensity Gas Discharge (HID) Lamp (L14)
• Right High Beam Headlamp Bulb (M32) , on vehicles with HID headlamp bulbs Right Headlamp Reflector Adjustment Solenoid (N396)
• Left Low Beam Headlamp (M29) , for vehicles with gas-discharge lamps Left High Intensity Gas Discharge (HID) Lamp (L13)
• Left High Beam Headlamp Bulb (M30) , on vehicles with HID bulbs Left Headlamp Reflector Adjustment Solenoid (N395)
• Left Parking Lamp (M1)
• Right Parking Lamp (M3)
• Left Front Turn Signal Light (M5) and Left Rear Turn Signal Light (M6)
• Right Front Turn Signal Light (M7) and Right Rear Turn Signal Light (M8)
• Left Front Fog Light (L22) and Right Front Fog Light (L23)
• Only in vehicles with gas-discharge lamps Right High Beam Headlamp (M32) and Left High Beam Headlamp (M30)
• Headlamp Washer System Relay (J39) and Headlamp Washer Pump (V11)
• Emergency Flasher Indicator Lamp (K6)
• High Tone Horn (H2) and Low Tone Horn (H7)
• Left Front Footwell Lamp (L151) , Right Front Footwell Lamp (L152) , Left Rear Footwell Illumination Bulb (L106) and Right Rear Footwell Illumination Bulb (L107)
• Windshield and Rear Window Washer Pump (V59)
• Seat heating release
• Supply Rain/Light Recognition Sensor (G397)
• Emergency start signal
- Connect the vehicle diagnostic tester. Refer to=> [ Vehicle Diagnosis, Testing and Information Systems ] Testing and Inspection.
- In the vehicle diagnostic tester, select "guided fault finding".
- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
• Body
• Electrical Equipment
• 01 - On Board Diagnostic (OBD) capable systems
• 09 - Vehicle electrical system control module J519
• 09 - Vehicle electrical system control module functions
• 09 - Output diagnostic test mode