T-Pipe, Connection to Oil Cooler

T-pipe, connecting to oil cooler

Special tools:
999 2531 MANOMETER 999 2531 Manometer
999 7002 Adapter automatic gearbox 4T65E 999 7002 Adapter Automatic Gearbox 4T65E

Diagnostic testing of the lock-up function in the control system




Measure the pressure by connecting the T piece between the oil cooler and the return hose.

Tools:
Oil pressure gauge 999 2531 MANOMETER 999 2531 Manometer
T pipe (adapter) 999 7002 Adapter automatic gearbox 4T65E 999 7002 Adapter Automatic Gearbox 4T65E

Preparations
For transmission temperature, see VIDA vehicle communication.
Connect the pressure gauge hose to the T piece.
Tighten the screw. Tighten to 25 Nm.




Disconnect the oil pipe from the oil cooler.
Collect any oil that flows out.




Connect the T piece to the oil cooler (push it into place).
Connect the oil hose to the T piece.