Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when the audio-navigation unit YAW sensor's temperature is out of its specified range.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.
- Do this test only when the vehicle cabin temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu Navigation System Diagnostic Mode.

4. Check the System Links.

Is the Yaw Sensor icon red?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�