Headlamp Washer Motor: Service and Repair

Headlight Washer Motor Test/Replacement

Canada models

1. Remove the right inner fender Front Inner Fender Replacement.

2. Disconnect the 2P connector (A) from the washer motor (B).





3. Test the motor by connecting battery power to headlight washer motor 2P connector terminal No. 1 and ground to terminal No. 2. The motor should run.

- If the motor does not run or fails to run smoothly, replace it.
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.

4. Install the washer motor in the reverse order of removal.