Adaptive Cruise Control
Adaptive Cruise Control (ACC) DTC Troubleshooting: 63
DTC 63:
Millimeter Wave Radar Aiming Error
1. Clear the DTCs with the HDS.
2. Press the engine start/stop button to select the ON mode, then wait for 10 seconds.
3. Watch the ACC indicator and the CMBS indicator.
Do both indicators come on?
YES -
Go to step 4.
NO -
Intermittent failure, the system is OK at this time.�
4. Check for DTCs with the HDS.
Is DTC 63 indicated?
YES -
Go to step 5.
NO -
Troubleshoot the indicated DTC(s). If there are no DTCs, the system is OK at this time.�
5. Remove the front bumper Service and Repair.
6. Check the installation of the millimeter wave radar and the main bracket.
Is the installation OK?
YES -
Go to step 7.
NO -
Reinstall or replace the part that has a problem, then go to step 7.
7. Aim the millimeter wave radar Adjustments.
8. Test-drive the vehicle at 25 mph (40 km/h) or more, and press the MAIN switch ON.
9. With the ACC activated, test-drive the vehicle on a straight road at 25 mph (40 km/h) or more for 5 minutes or more.
10. Watch the ACC indicator and the CMBS indicator.
Do both indicators come on?
YES -
Go to step 11.
NO -
The system is OK at this time.�
11. Check for DTCs with the HDS.
Is DTC 63 indicated?
YES -
Check for loose or poor connections. If OK, replace the millimeter wave radar Service and Repair. After replacement, aim the millimeter wave radar Adjustments.�
NO -
Troubleshoot the indicated DTC(s). If there are no DTCs, the system is OK at this time.�