Manufacturer Code Charts: 64

Adaptive Cruise Control (ACC) DTC Troubleshooting: 64

DTC 64:

CMBS Operation Error (Excessive Operation)

NOTE: If the CMBS operates frequently, DTC 64 is stored.

1. Remove the front bumper Service and Repair.

2. Inspect the frame for warpage, and check the installation of the millimeter wave radar and the main bracket.

Is the installation and the frame OK?

YES -

Go to step 3.

NO -

Reinstall the components correctly, or replace if damaged, then go to step 3.

3. Press the engine start/stop button to select the ON mode, then wait for 10 seconds.

4. Aim the millimeter wave radar Adjustments.

5. Clear the DTCs with the HDS.

6. Press the MAIN switch ON.

7. Watch the CMBS indicators.

Does the CMBS indicator come on?

YES -

Go to step 8.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections.�

8. Clear the DTCs with the HDS.

9. Watch the CMBS indicator.

Does the CMBS indicator come on?

YES -

Go to step 10.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections.�

10. Check for DTCs with the HDS.

Is DTC 64 indicated?

YES -

Check for loose or poor connections. If OK, update the ACC unit Programming and Relearning, then recheck. If the ACC unit was already updated, replace the ACC unit Service and Repair.�

NO -

Troubleshoot the indicated DTC(s).�