Rear Seat Cushion Cover Replacement

Rear Seat Cushion Cover Replacement

1. Remove the rear seat cushion Rear Seat Removal / Installation.

2. Release all the upholstery rings (A) from under the seat cushion, and fold back the seat cushion cover.






3. Pull back the edge of the seat cushion cover all the way around, and release the upholstery rings (A), then remove the seat cushion cover.






4. Install the cover in the reverse order of removal, and note these items:

- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips.
- Use only original Acura replacement seat cushion covers.
- Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).