Trunk Pass-Through Cover Key Cylinder Replacement

Trunk Pass-Through Cover Key Cylinder Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the rear seat-back Rear Seat Removal / Installation.

2. Remove the screws, and release the hooks (A), then remove the upper cover (B).






3. Remove the screws, and release the hook (A), then pull out the key cover (B) to release the hook (C).






4. Remove the retainer clip (A), then remove the trunk pass-through cover key cylinder (B) from the lid (C).

NOTE: Wear eye protection when doing this step.





5. Install the key cylinder in the reverse order of removal, and note these items:

- Make sure the trunk pass-through cover opens properly and locks securely.
- Push the hooks into place securely.