Manufacturer Code Charts: 2603

Navigation System DTC Troubleshooting: 2603

DTC 2603:

Display Diag: RAM

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a malfunction is detected in the navigation display unit.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How to Troubleshoot the Navigation System.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

2. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu Navigation System Diagnostic Mode.

3. Select the Display in the System Link.

Is the RAM NG?

YES -

Replace the navigation display unit Navigation Display Unit Removal/Installation.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation display unit Navigation Display Unit Removal/Installation.