A/T Differential Carrier and Final Driven Gear Replacement

A/T Differential Carrier and Final Driven Gear Replacement

NOTE: Inspect and adjust the carrier bearing preload whenever the differential carrier is replaced.

1. If necessary, remove the carrier bearings (A) A/T Differential Carrier Bearing Replacement.





2. Remove the final driven gear (B) from the differential carrier (C).

NOTE: The final driven gear bolts (D) have left-hand threads.

3. Replace the differential carrier or the final driven gear.

4. Install the final driven gear on the differential carrier in the direction shown.

5. Tighten the bolts to the specified torque in a crisscross pattern in at least two steps.

6. If you removed the carrier bearing for the differential carrier replaced, install the carrier bearings A/T Differential Carrier Bearing Replacement; replace it if it is damaged.