A/T Gear Position Indicator Replacement

A/T Gear Position Indicator Replacement

NOTE: The A/T gear position indicator, the park pin switch, and the shift lock solenoid harness are not available separately. Replace the A/T gear position indicator, the park pin switch, and the shift lock solenoid harness as a set.

1. Remove the shift lever assembly A/T Shift Lever Removal.

2. Remove the shift lock solenoid, and disconnect the shift lock solenoid connector Service and Repair.

3. Remove the harness wire ties (A).





4. Remove the park pin switch (B), and replace the A/T gear position indicator/park pin switch/shift lock solenoid harness assembly (C).

5. Connect the shift lock solenoid connector, and install the shift lock solenoid in the shift lever Service and Repair.

6. Route the harnesses as shown. Take the slack out of the harnesses, and secure the harnesses with the harness wire ties (A).






7. Install the shift lever assembly A/T Shift Lever Installation.