Engine Control Module: Testing and Inspection

Control Module, Coding

NOTE: At present there is only one coding for the engine control modules of the Audi RS6. This is firmly programmed in the ECM. It is: 0006752.

- Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" from list. Ignition must be on. Connecting VAS 5051 Scan Tool

Indicated on VAS 5051:







- From list -1- select diagnostic function "07 - Encoding control module".

Indicated on VAS 5051:







1 - Enter code word

NOTE: It is not necessary to use the keypad -2- to enter the 7-figure code. See previous Note.







NOTE: "TLEV" stands for Transient Low Emission Vehicles.

- Confirm entry by touching Q key.

Indicated on VAS 5051:







1 Encoding in progress
- Wait until next display appears.

Indicated on VAS 5051:







1 Vehicle system coding completed
2 Control module identification with new code (old code in brackets)
- End function "07 - Coding control module" by touching <- key.