Variable Convertible Top Compartment Micro Switch

Variable Convertible Top Compartment Micro switch

- Remove the variable convertible top compartment. Refer to => [ Variable Convertible Top Compartment ] Variable Convertible Top Compartment.

- Pull the carpet - 1 - (convertible top compartment trim) on the right side until both screws are accessible - 2 -.





• Glue the carpet with D 001 200.

- Remove bolts - 2 - (Qty. 2).

• Tightening specification 4 Nm

- Separate the center part of the compartment - 3 - from the side panel - 4 -.

- Pull the side panel - 1 - and - 2 - apart from each other.





- Remove the screws - 3 - (Qty. 4) from the inner cover.

• Tightening specification 2 Nm

- Remove the inner cover - 1 -.

- Carefully drill a hole in the micro switch weld on the outer side.

- Remove the micro switch - 1 -.





- Well the new micro switch - 1 - with soldering iron on the outer side.