Input Shaft With 7 Lining Discs Assembly Overview

Input Shaft with 7 Lining Discs Assembly Overview

CAUTION!
• Note the difference between input shafts with 6 and 7 lining discs => [ Input Shaft, Servicing with 7 Lining Discs ] Input Shaft, Servicing With 7 Lining Discs.





1 Input shaft seal

• Replace => [ Input Shaft Seal ] Overhaul

2 Input shaft cover circlip

• Replace with same thickness

3 Input shaft cover

• After removing the cover, the input shaft cover bearing "A " (transmission input shaft ball bearing) must be replaced => [ Bearing A in Input Shaft Cover ] Bearing A in Input Shaft Cover

4 Piston

• Check for wear.

5 Pressure plate

• Check for wear.

6 Corrugated spring washer

7 Upper adjustment disc

• Determine thickness => [ Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination ] Input Shaft With 7 Lining Discs, Adjusting With Air Gap Determination

• Replace

8 Lining disc

• Quantity: 7

• Replace

9 Outer disc

• Quantity: 6

• Replace

10 Lower adjustment disc

• Determine thickness => [ Input Shaft with 7 Lining Discs, Adjusting with Air Gap Determination ] Input Shaft With 7 Lining Discs, Adjusting With Air Gap Determination

• Replace

11 Input shaft cylinder

• Check for wear.

12 O-Ring

• Replace

13 Oil pipe

• Check for wear.