Relay and Fuse Panel, Passenger Footwell

Relay and Fuse Panel, Passenger Footwell

Removing





- Switch off ignition and remove ignition key.

- Remove the nuts - 3 and 4 - and bolt - 1 -.

- Remove the passenger footwell relay carrier and fuse panel baseplate - 2 - - arrow -.

Vehicles through 05.09





- Release the retaining springs - A arrows - and remove the vehicle electrical system control module (J519) - item 1 - upward out of the relay and fuse panel - arrow B -.

Vehicles from 06.09





- Release the spring - arrows A - and remove the vehicle electrical system control module (J519) to the left from the relay and fuse panel - arrow B -.

All Vehicles





- Release the retaining clips - arrows - and press the fuse panels - 1 through 6 - back and out of the baseplate.

- Remove the fuses from the fuse panel.





- Release retaining clips - arrows - and remove the cover from the fuse panel.

- Remove connector retaining strip - 1 - - arrow - and remove connectors from plug-in socket.





• Check the exact assignment for the passenger footwell fuse panel in the current wiring diagram.

Installing

• Tightening specifications, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] Front Relay Carrier and Fuse Panel Assembly Overview

Install in reverse order of removal, observing the following:

- Install the vehicle electrical system control module. Refer to => [ Vehicle Electrical System Control Module ] Service and Repair.

- Install the passenger footwell relay carrier base plate. Refer to => [ Relay Carrier and Fuse Panel, Passenger Side ] Relay Carrier and Fuse Panel, Passenger Side.

- Connect battery. Required actions => [ Connecting ] Battery, Disconnecting and Connecting.