Shift Cable and Selector Cable to Model Year 2007 Assembly Overview
Shift Cable and Selector Cable to Model Year 2007 Assembly Overview
• Grease bearing areas and slide surfaces with grease (G 000 450 02).
1 Retaining Washer
2 Control Cable Retainer
• For the selector cable on the selector relay lever
• Allocation
• Release to adjust selector mechanism => [ Release cable retainer for
selector and shift cables as follows: ] Adjustments
3 Retaining Washer
4 Control Cable Retainer
• For shift cable to transmission shift lever
• Allocation
• Release to adjust selector mechanism => [ Release cable retainer for
selector and shift cables as follows: ] Adjustments
5 Bushing
6 Grommet
7 Shift Cable
• Removing and installing, refer to => [ Shift Cable and Selector Cable ] Service and Repair
• From VIN 8J-7-013001, modified attachment to the shift lever within the shift mechanism - 8 - => [ Shift Cable ] Shift Lever and Shift Housing For Vehicles From VIN 8J-7-013001 Assembly Overview
• Adjusting, refer to => [ Shift Mechanism, Adjusting ] Adjustments
8 Lock Washers
• No longer used from VIN 8J-7-013001
9 Circlips
10 Selector Cable
• Removing and installing, refer to => [ Shift Cable and Selector Cable ] Service and Repair
• From VIN 8J-7-013001, modified attachment to the selector bracket within the shift mechanism - 6 - => [ Selector Cable ] Shift Lever and Shift Housing For Vehicles From VIN 8J-7-013001 Assembly Overview
• Adjusting, refer to => [ Shift Mechanism, Adjusting ] Adjustments
11 Bolt
• 20 Nm
• Quantity 3
12 Control Cable Mounting Bracket
13 Nut
• Only in vehicles with a 4-cylinder engine
Allocation of Control Cable Retainers
The holes in the control cable retainers have various diameters.
Starting in 06/2006, Smaller Mounting Pin Diameter for the Shift Cable Retainer