Throttle Valve Control Module

Throttle Valve Control Module

Removing

- Remove air guide hose - arrows -.





• Ignore - 1 -.

- Separate the electrical connector - 3 -.





- Disconnect crankcase ventilation hose - 1 -.

- Free up oxygen sensor wires on throttle valve control module (J338).

• Ignore - 2 -.

- Remove the bolts - arrows -.





- Remove throttle valve control module (J338) from intake manifold.

Installing

• Tightening specifications, refer to => [ Intake Manifold Assembly Overview ] Intake Manifold Assembly Overview.

Installation is in reverse order of removal.