Seat Frame

Seat Frame

Removing

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Vehicles with seat forward/back adjustment: move the rear seat all the way to the rear.

Left 2/3 rear seat






- Remove the bolts - 1, 2, 3, 4 -.

- Unclip the cable coupling station - 5 - on the seat frame - arrow -, open the cover and disconnect the cable.

Right 1/3 rear seat






- Remove the bolts - 1, 2, 3, 4 -.

- Unclip the cable coupling station - 5 - on the seat frame - arrow -, open the cover and disconnect the cable.

Procedure for both sides

- Vehicles with seat heating: free up the seat heating connector on the seat frame.

- Fold the rear seat backrest forward and, with a second technician, lift the rear seat out of the vehicle.

Installing

Installation is reverse of removal, but note the following:

Left 2/3 rear seat






- Tighten the bolts in the following sequence - 1, 2, 3 and 4 -.

Right 1/3 rear seat






- Tighten the bolts in the following sequence - 1, 2, 3 and 4 -.

Procedure for both sides

- Attach the cable and clip the coupling station to the seat frame.

Tightening specifications, refer to => [ Seat Overview ] Seat Overview.