Headlamp Assistant, Humidity Sensor and Lane Assist Assembly Overview

Headlamp Assistant, Humidity Sensor and Lane Assist Assembly Overview






1 Front Cover

• For the housing for the automatic high beam control module (J844) with light recognition sensor (G399)

2 Screw

• 2.4 Nm

3 Headlamp Assistant

• If the automatic high beam control module is faulty, it is not possible to replace the light recognition sensor. The whole rearview mirror must be replaced.

4 Upper Cover

5 Interior Rearview Mirror

6 Upper Cover

• For the directional stabilization assistance control module

7 Directional Stabilization Assistance Control Module (J759)

8 Lower Cover

• For the directional stabilization assistance control module

9 Rear Cover

10 Central Connector

11 Humidity Sensor (G355)

• Vehicles without automatic high beam, removing and installing, refer to => [ Humidity Sensor, without Headlamp Assistant ] Humidity Sensor, Without Headlamp Assistant

• Vehicles with automatic high beam, removing and installing, refer to => [ Humidity Sensor, with Headlamp Assistant ] Humidity Sensor, With Headlamp Assistant