Coupling Rod With Backrest Release Cable - Avant

Coupling Rod with Backrest Release Cable - Avant

Removing






- Remove rear seat bench. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Remove the luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim Panel ] Luggage Compartment Side Trim Panel.

- Open coupling rod cover - 1 -.

- Unclip the release cable - 4 - at the coupling rod - 2 - for the release cable - arrow -.

- Remove the release cable nipple - 3 -.

- Remove coupling rod for the release cable on the vehicle underbody.

- Unclip the brackets - 1 - and - 2 - for the release cable and remove the release cable- 3 - along with the coupling rod.






Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Locking Mechanism and Backrest Release Assembly Overview - Avant ] Locking Mechanism and Backrest Release Assembly Overview - Avant.