Luggage Compartment Side Trim Panel

Luggage Compartment Side Trim Panel

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)






Removing

- Remove luggage compartment cover.

- Remove the screen separator.

- Remove the side cushion. Refer to => [ Side Cushion ] Side Cushion.

- Remove the rear cross panel trim. Refer to => [ Rear Cross Panel Trim ] Rear Cross Panel Trim.

- Remove the retaining track. Refer to => [ Rail ] Rail.

- Remove the release for the backrest release. Refer to => [ Release for Backrest Release - Avant ] Release For Backrest Release - Avant.

- Remove the cover for the luggage compartment side panel.






- Remove the rear lid seal - 1 - near the luggage compartment side trim panel.

- Remove the screw - 2 -.

- Remove the rubber grommet - 3 - on the screen separator bracket.

- Pry off the rear luggage compartment side trim - 5 - using the pry lever (80 - 200) from the body - arrows -.

- Remove the luggage compartment side trim panel from the D-pillar trim and the C-pillar trim - arrows -.

- Remove the luggage compartment side trim panel from the catch - 4 - for the rear seat backrest.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Luggage Compartment Side Trim Assembly Overview ] Luggage Compartment Side Trim Assembly Overview.