Tunnel Side Trim

Tunnel Side Trim

Removing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnical components (for example, disconnecting the connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

- Remove the front seat. Refer to => [ Power Standard Seat/Sport Seat/Super Sport Seat ] Power Standard Seat/Sport Seat/Super Sport Seat.

- Attach front seat to the fixture for seat repair (VAS 6136). Refer to => [ Front Seat on Fixture for Seat Repair VAS 6136, Installing ] Seats Overview.

- Remove expanding rivet - 1 -.






- Remove the screw - 3 -.

- Detach tunnel side trim - 2 - on the backrest hinge trim - arrow - and remove.

Installation

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

• Observe all measures when installing the front seat. Refer to => [ Power Standard Seat/Sport Seat/Super Sport Seat ] Power Standard Seat/Sport Seat/Super Sport Seat.

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Sill and Tunnel Side Front Trim Assembly Overview ] Sill and Tunnel Side Front Trim Assembly Overview.