Center Armrest, Bracket and Hinges, One-Piece Rear Seat Backrest

Center Armrest, Bracket and Hinges, One-piece Rear Seat Backrest

Removing






- Remove the rear panel trim panel. Refer to => [ Rear Panel Trim Panel ] Rear Panel Trim Panel.

- Remove the right and left bracket nuts - 3 - evenly.

- Fold the center armrest - 1 - 2/3 up and remove the screws - 4 -.

- Remove the center armrest, the bracket and hinges from the rear seat backrest.

Installation

Install in reverse order of removal. Note the following:

- Tighten the right and left bracket nuts - 3 - alternating sides.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Center Armrest Assembly Overview ] Rear Center Armrest Assembly Overview.