Evaporative Emissions System: Diagrams

EVAP Canister and Leak Detection System Hose Diagram






1 Vent Line

• From the EVAP canister to Evaporative Emission (EVAP) canister purge regulator valve 1 (N80)

2 Fuel Tank

3 Vent Line

• From fuel tank to EVAP canister

4 Air Filter

• For the leak detection system

5 EVAP Canister

• Installed location: On the left side at the back of the underbody under the cover

• Removing and installing, refer to => [ EVAP Canister ] Service and Repair

6 Vent Line

• To air filter

7 Vent Line

• To EVAP canister purge regulator valve 1

8 Fuel Tank Leak Detection Control Module (J909)

• With an integrated fuel tank pressure sensor (G400)

• Installed location: on the left side at the back of the underbody under the cover

• Checking in Guided Functions see vehicle diagnostic tester

• Removing and installing, refer to => [ Fuel Tank Leak Detection Control Module (J909) ] Fuel Tank Leak Detection Control Module (J909)

9 EVAP Canister Purge Regulator Valve 1 (N80)

10 Check Valve