Power Distribution Module: Service and Repair

Vehicle Electrical System Control Module (J519)

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" using the Vehicle Diagnostic Tester.

Removing






- Disengage the relay panel under the instrument panel on the left side and the relay- and auxiliary fuse panels still connected to the mount. Refer to => [ Relay Panel Under Left Instrument Panel ] Relay Panel Under Left Instrument Panel.

- Disconnect the connectors - 1, 2, 5, 6 and 7 -.

- Disconnect the connectors - 3 and 4 -.

- To disconnect the electrical connector, press the catch - 1 -, rotate the retaining bracket in the - direction of the arrow - and remove the connector.






- Release the spring - 1 - and remove the vehicle electrical system control module- 2 - downward - arrow -.






Installing

Install in reverse order of removal. Note the following:

- Install the relay panel under the instrument panel on the left side. Refer to => [ Relay Panel Under Left Instrument Panel ] Relay Panel Under Left Instrument Panel.