Trunk / Liftgate Latch: Service and Repair

51 24 100 - Removing and installing/replacing rear lid lock (upper section)





Necessary preliminary tasks:
- Remove panel for rear lid





Unlock catch (1) and detach Bowden cables (2 and 3) from rear lid lock upper section (5).
Version with manual unlocking:

Installation:
Bowden cable (2) must be correctly positioned in guide (4).





Release screws (1).
Unscrew rear lid lock upper section (2), disconnect plug connection and remove.
Tightening torque 51 24 5AZ [1][2]Specifications.





Installation:
Perform function check with rear lid open.
- Adjust rear lid lock Adjustments





Replacement:
Release screws (1).
Detach servodrive (2) from rear lid lock upper section (3) in direction of arrow.