Replacing Sealing Frame for Left or Right Rear Light

63 21 101 - Replacing sealing frame for left or right rear light





Necessary preliminary tasks:
- Remove rear light Removing and Installing/Replacing Left or Right Rear Light





Detach sealing frame for rear light pot (1) and sealing frame for side panel (2) completely from rear light (3).
Clean bonding surface and allow to dry.

Installation:
- Centre sealing frame for rear light pot (1) by means of guide (4) and reinforcement (5)
- Make sure sealing frame for rear light pot (1) and sealing frame for side panel (2) are correctly positioned on rear light (3)
- Make sure sealing frame for rear light pot (1) and sealing frame for side panel (2) are glued all round on rear light (3)