BCM Setup - Service Programming System Method

Perform the Body Control Module (BCM) Setup - Service Programming System Method procedure only when indicated. This procedure is used when the Tech 2 scan tool is unable to complete the New BCM setup.

IMPORTANT: After this procedure has been completed, perform the Theft Deterrent Relearn procedure. The vehicle will not work properly if this procedure is not followed after setting the BCM to the features of the vehicle. Theft Deterrent Re-Learn

There are two different ways that the BCM setup may be accomplished using the service programming system method terminal application:
1. BCM Setup/Reprogramming Procedure - Direct Programming.
2. BCM Setup/Reprogramming Procedure - Indirect Programming.