Suspension Control - Real Time Damping (RTD)
DTC 34 Vehicle Speed Signal Error:
CONDITIONS FOR SETTING THE DTC
A vehicle speed signal error occurs when the Control Module detects 5 or more transitions in the lateral accelerator switch input after 20 or more seconds without a vehicle speed input. if a fault is detected, the system will set error code 34 and activate the error lamp.
ACTIONS TAKEN WHEN THE DTC SETS
1. Record vehicle speed signal error.
2. Turn on both of the driver select switch L.E.D.s. The system will continue to default to zero speed damping level (Sport mode).
DIAGNOSTIC AIDS
Notes on Intermittents
Refer to INTERMITTENTS AND POOR CONNECTIONS. Intermittents and Poor Connections
Also refer to DTC 32 LATERAL ACCELERATOR SWITCH ERROR. DTC 32