Enter Programming

To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the ENG/MET button for 5 seconds.
4. The DIC displays WELCOME TO BUICK OPTION FEATURE then PRESS ENG/MET TO SELECT OPTIONS then PRESS RESET TO GO TO NEXT CHOICE.
5. The DIC then displays DRIVER #1 2. An arrow is shown next to the current driver.
6. Press the ENG/MET button in order to change the driver # for this programming session.
7. Press the RESET button in order to advance to the next option.