Suspension Control - Computer Command Ride (CCR/SSS)

CODE 34 VEHICLE SPEED SIGNAL ERROR









TEST CONDITIONS:
Check for vehicle speed signal during periods when vehicle movement is suspected.

FAULT CONDITIONS:
If vehicle speed signal is not detected for 20 seconds, followed by 5 or more transitions in lateral accelerator switch input, set code.

ACTION TAKEN:
Record vehicle speed signal error,
Turn on "SERVICE CCR"/"SERVICE SSS" telltale lamp,
System will continue to default to zero speed damping level (Sport mode).

DESCRIPTION:
A vehicle speed signal error occurs when the Control Module detects 5 or more transitions in the lateral accelerator switch input after 20 or more seconds without a vehicle speed input. If a fault is detected, the system will set error code 34 and activate the error lamp.

NOTES ON INTERMITTENTS:
Refer to "Lateral Accelerator Switch Error (Code 32)," and to diagnostics in Computers and Controls. Suspension Control - Computer Command Ride (CCR/SSS)