Ignition Control Module: Service and Repair

Ignition Module And Coils Replacement:

REMOVE OR DISCONNECT
- Spark plug wires at Ignition Control Module (ICM) Assembly .
- Four electrical connectors at Ignition Control Module.
- Four bolts retaining ICM Assembly to rear camshaft cover.
- Ground Strap
- ICM Assembly from vehicle.
- Ignition coils from ICM Assembly.
- ICM from assembly bracket.

INSTALL OR CONNECT
- ICM to assembly bracket.
- Ignition coils to ICM Assembly.
- Position ICM Assembly on rear camshaft cover and install four bolts.
- Torque four bolts to 12 Nm (106 lb. in.).
- Four electrical connectors at ICM.
- Spark plug wires at ICM Assembly.