Theft Deterrent Module

REMOVAL PROCEDURE

Theft Deterrent Module Replacement: Removal Procedure:

1. Remove left sound insulator.
2. Remove electrical connector from module.
3. Move bottom of module (3) towards brake pedal first and then slide down from bracket (2).

INSTALLATION PROCEDURE

Theft Deterrent Module Replacement: Installation Procedure:

1. Slide module (2) up into bracket (1) until bottom clears bracket and sits flush in bracket.
2. Install electrical connector.
3. Install the left sound insulator.
4. If the pass-key III module is being replaced. Refer to PASSLOCK Reprogramming Auto Learn. Passlock Reprogramming Auto Learn