Trunk / Liftgate Striker: Service and Repair

Rear Compartment Lid Latch Striker Replacement

Removal Procedure




1. Open the rear compartment.
2. Remove the rear end trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement (Rear Compartment Lid Inner Panel Trim Replacement).
3. Remove the rear compartment lid latch striker (2) bolt.
4. Remove the rear compartment lid latch striker washer (1).
5. Remove the rear compartment lid latch striker (3).

Installation Procedure




1. Install the rear compartment lid latch striker (3).
2. Install the rear compartment lid latch striker washer (1).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the rear compartment lid latch striker bolt (2).

Tighten the rear compartment lid latch striker bolt to 20 Nm (15 lb ft).

4. Install the rear end trim panel. Refer to Rear Compartment Trim Panel Replacement (Rear Compartment Trim Panel Replacement).
5. Close the rear compartment.