LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Installation

Installation






INSTALLATION




1. Install the crankshaft position sensor (1) to the engine. Tighten to 8 Nm (71 in. lbs.).

2. Connect the crankshaft position sensor harness connector.

3. Install the air cleaner housing.

4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals