LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1998 >> Intrepid V6-3.2L VIN J >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Diagrams >> Diagram Information and Instructions >> Service Procedures >> Terminal/Connector Repair-Augat Connectors

Terminal/Connector Repair-Augat Connectors

1. Disconnect battery
2. Disconnect the connector from its mating half/component.

Augat Connector Repair:




3. Push down on the yellow connector locking tab to release the terminals.

Using Special Tool 6932:




4. Using Special Tool 6932, push the terminal to remove it from the connector.
5. Repair or replace the connector or terminal as necessary
6. When re-assembling the connector, the locking wedge must be placed in the locked position to prevent terminal push out.
scientia non olet · About LEMON Manuals