Fuel Fill Housing - Removal

REMOVAL





1. Remove the left side quarter trim panel. Quarter Trim Panel - Removal
2. Position aside the left rear wheel liner to gain access to the back side of the fuel filler housing. Splash Shield - Removal
3. Open the fuel fill door (1).





4. Locate the four locking tabs on the fuel filler housing (1).
5. Using Trim Stick C-4755 or equivalent, release the locking tabs (1) and release the housing from the body.
6. Disconnect the electrical connector (2).





7. Separate the front of the housing (1) from the body panel and off of the fuel filler neck.
8. Slide the housing forward and pull it away from the rear of the opening and release the solenoid from the body.